Introduction

Use this guide to solve the Blue Screen of Death with an Alienware 15 R3.

The Blue Screen of Death may occur if the Alienware 15 R3 fails to read the drive containing system files when booting. Changing the boot option in BIOS would not help to solve this particular problem. Therefore, replacing the hard drive in the Alienware 15 R3 is the most effective solution.

It is recommended to backup important files from your hard drive before repairing.

  1. SSVIjsmOyksAxlRc
    SSVIjsmOyksAxlRc
    sTsJbcDFySNSQacW
    NHTaBmr1FsoYoCWH
    • Find the Power option in the start menu and click Shut Down to turn off your Alienware 15 R3.

    • Wait a few seconds until all the computer's lights are off.

    • Unplug the power supply.

  2. 44x4JD2JVP4gMAMa
    44x4JD2JVP4gMAMa
    xENMtMdWKZBACwjE
    B4RctLEfGBWkIpB6
    • Remove the seven M2.5x13 screws from the base cover.

    • Remove the base cover carefully.

    • Save these screws for later.

    • The screw on the top middle of the base cover cannot be removed after unscrewing. However, it is okay to remove the base cover.

  3. RFvuYfHsNfrwQFc6
    RFvuYfHsNfrwQFc6
    UQOOIOTjdWIO4sZJ
    jshcyYDXmjd5xFGb
    • Remove the two M3x3 screws that are holding the bracket and the one M2.5x8 screw holding the hard drive assembly.

    • Remove the hard drive from the laptop.

  4. 5Yu5PTxJwWYLlr6J
    5Yu5PTxJwWYLlr6J
    1U5afVZgZIHUOiZQ
    • Prior to reassembly, clean the dust from the fans as circled in the picture if needed.

    • Put the bottom plate back on your laptop and secure it with the screws removed previously.

  5. kDo2SHWrIunMDACU
    • Your Alienware 15 R3 is ready to roll!

Conclusion

By removing the HDD, the Blue Screen of Death should not occur anymore when booting the laptop. Please note that the volume of storage on your computer may change.

Yutong Yin

Member since: 10/05/21

166 Reputation

0 comments