Introduction

The audio and video connectors on a Sony Handycam are essential for transmitting sound and image signals to provide external audio and visuals.  Over time, these ports can wear out, loosen, or sustain damage after repeated use, which may result in poor signal.  Replacing these connectors is necessary when the playback and/or connection becomes unreliable.  This repair may require basic mechanical skills.

  1. mc2aOERDPayrCFPG
    • Use a Phillips #00 screwdriver to remove the eight screws located on the bottom of the camera.

  2. y1UQLxkXuMmD6GNb
    • Use a Phillips #00 screwdriver to remove the five cassette side cover screws.

  3. PLlxVTQFE4pdnmYJ
    • Use a Phillips #00 screwdriver to remove the two top microphone screws.

    • Remove the microphone and cassette side cover.

  4. QH1cI1PC4RfYEbrb
    • Use a Phillips #00 screwdriver to remove the two screws from the Input/Output.

    Is this a problem why I'm not hearing sound from my tapes when I go to play them back

    Kelly -

  5. HoOoQSFrPPLrO6pA
    HoOoQSFrPPLrO6pA
    KdCXtFrWLtWAVnPF
    • Gently remove the Input/Output plug from the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Aaron Hovde

Member since: 04/10/11

101 Reputation

One comment

Hey where can I get this replacement part?? Miami, USA thx

gerardzz -